Your No-Drill™
Laptop Stand System installs quickly and easily into the
specified vehicles using the existing hardware of the passenger side
seat rails. This configuration provides a telescoping feature that
ranges from 12 to 18 inches. Dual swing arms provide articulation
and 12 inches of reach for passenger and driver access to the
mounted device. Patented rubber ball and socket joint provides
additional adjustment as well as shock and vibration isolation. The
RAM Tough Tray™ is spring loaded to accommodate 10 to 16 inch wide
laptops (17" screens). The tray features four adjustable retaining
arms with rubber grip feature. These arms can be moved both
vertically and horizontally. This allows for a custom fit for
varying thicknesses of laptops and the freedom of not blocking ports
or drives. A screen support and USB light are also available to
accessorize the tray. Hole patterns on perimeter of tray facilitate
the mounting of additional RAM systems to support GPS or other
electronics.
* This base may not work with the
factory installed center console or with Four Wheel Drive Levers
that are on the floor. Drilling may be needed for vehicles with a
bench seat. Note that the measurement "D" is 9 1/2"
(Refer to the installation guide at the top-left of this page.) Check your
vehicle dimensions prior to purchasing this base. Some models have
factory installed accessories that prevent installation.
