Description
Your No-Drill™ Laptop Stand System installs
quickly and easily into the specified vehicles using the
existing hardware of the passenger side seat rails. This
configuration provides a telescoping feature that ranges from 12 to
18 inches. Dual swing arms provide articulation and 12 inches of
reach for passenger and driver access to the mounted device.
Patented rubber ball and socket joint provides additional adjustment
as well as shock and vibration isolation. The RAM Tough Tray™ is
spring loaded to accommodate 10 to 16 inch wide laptops (17"
screens). The tray features four adjustable retaining arms with
rubber grip feature. These arms can be moved both vertically and
horizontally. This allows for a custom fit for varying thicknesses
of laptops and the freedom of not blocking ports or drives. A screen
support and USB light are also available to accessorize the tray.
Hole patterns on perimeter of tray facilitate the mounting of
additional RAM systems to support GPS or other electronics.
If you are
installing this product into a 2009-2010 F-150 with the slide out
cup holder, the
RAM-VB-109A-SW1
is the preferred kit. The standard RAM-VB-109-SW1 kit on this page will install
but will limit the use of the cup holder. To use the RAM-VB-109-SW1
shown on this page while maintaining use of the slide out cup holder, pull the cup
holder all the way out prior to installation. Once installed, the
cup holder will not be able to slide back under the center console.
The
RAM-VB-109A-SW1 features an
adjustable riser that can be positioned so the cup holder is not
interfered with. |
Shown with Panasonic laptop
 |