This
plate allows you to install the Ram Laptop Computer Stand into almost
ANY
big-rig truck without drilling. By loosening the bolts under
EITHER seat, you can lift the seat and slide this
heavy-duty
mounting plate under your seat frame and then tighten the seat bolts
back down.
Contents of the kit:
-
One large black plate for the "mounting" side of the seat
-
One small plate for the other side of the seat.
-
Four bolts, washers, and cap nuts.
Instructions:
-
Remove the parts from the box and inventory them.
-
Decide which way you want the post to face and where it is
comfortable.
-
Use the provided cap bolts and insert them from the bottom of the
plate. Let the plate set flat.
-
Finger tighten the cap nuts on top.
-
Loosen the four seat bolts about ¼ inch that mount your seat base to
the floor of your rig.
-
Slip the large plate number 1 side under your seat about 1 or 2
inches. Line up the slotted areas with the seat bolts.
-
On
the opposite side of the seat insert the small plate underneath. This
levels the seat.
-
Tighten all bolts and nuts securely.
-
Continue installing your laptop stand as instructed.
This
system works with the "Drill-Version" laptop stand
FOUND HERE in order
to make it require NO DRILLING on your part. It has several slots
pre-drilled in it so that you can mount your laptop mount in a variety
of ways:
-
On the passenger
seat is the most common
-
Or on the right
side of the driver's seat
-
It is easy to
install
-
It is HEAVY DUTY
unlike many "alternative" laptop stands on the market.
-
It is made
EXCLUSIVELY by Dieselboss in the USA and can only be found here.
-
We stand behind
EVERYTHING we sell 100% as the BEST.
-
Call us if you have any questions about
this or any other Dieselboss product.
Toll-free: 866-851-2346
Make sure to CHOOSE THE "no-drill" plate option if you want this added
to your Laptop Stand order.  |